The reject separator is currently the most ideal tailings treatment equipment. It can simplify the process of the waste paper pulp treatment system, save power consumption in the pulping process, greatly improve the efficiency of pulp fiber sorting, and optimize the pulping operating environment.

Work Flow Of Reject Separator

1. The upper half of the reject separator is a vortex chamber, and the lower half is a semicircular screening area. A high-rotating rotor is installed inside. The rotor is welded with axial sweeping blades and spirals arranged alternately. of sorting blades.
2. After the slurry enters the pulp inlet, the high-speed rotor performs a comprehensive function of beating, scraping, tearing, and peeling the tailings. The tailings are first thrown to the vortex chamber, and then dropped to the screening area to complete the fiber and the separation process of impurities,
3. At the same time, the nozzle above the rotor continuously sprays water to dilute and wash the tailings, and flush the rotor and screen plate. After repeated sorting cycles, the separated good fibers pass through the sieve holes and are discharged from the pulp outlet below the sieve plate. The stripped plastic sheets and other impurities are washed and discharged from the slag discharge hopper as garbage.

The reject separator of Leizhan Company is helpful to improve the efficiency of pulp preparation and optimize the importance of product quality.If you want to know more details about leizhan company’s pulping machine reject separator, please send an email for consultation. Email address: paperpulppump@gmail.com